Pruftechnik Rotalign Ultra Laser Shaft Alignment System

Pruftechnik Rotalign Ultra Laser Shaft Alignment System

Developed to perform shaft alignment, and a wide range of geometrical applications which include bore alignment, straightness and flatness measurement.

Pruftechnik Rotalign Ultra Laser Shaft Alignment System

Pruftechnik Rotalign Ultra Laser Shaft Alignment System

ROTALIGN Ultra sets new standards

This modular platform is developed to perform shaft alignment, and a wide range of geometrical applications which include bore alignment, straightness and flatness measurement.

Program Manager

Icons for direct access to applications and configurations
User defined machine templates
Individual user defined device configuration: languages, units, workflow, power management
The resume function opens the most recent measurement file

Design

Robust, shockproof, scratchproof, dustproof and water resistant
Ergonomic, compact and portable
Optional disposable batteries

Accurate alignment saves a lot of money!

More than 50% of damages to rotating machinery can be directly related to misalignment. Alignment using ROTALIGN Ultra results in the increase of machine availability and reliability, as well as in the reduction of maintenance costs.

Increased productivity as a result of reduced machine downtime
Reduced spare parts consumption and storage costs
Protection of asset through the reduction of vibration
Reduced energy consumption

Measurement flexibility

The patented single laser beam technology, the dual position detectors and the built-in electronic inclinometer allow the simultaneous measurement of the shaft rotation, both vertical and horizontal offset and angularity; eliminating any possible human error.

Measurement Modes

Patented continuous sweep mode

By turning the shafts from any position and in either direction, this patented mode automatically starts the continuous measurement of the alignment condition. The continuous taking of the readings leads to a quick and accurate result. A shaft rotation of only 60 degrees is required; thus overcoming shaft rotation restrictions.

Multipoint mode

For shafts that are mounted on all types of bearings. Measurements at any 3 or more positions; over 60 degree rotation are required.

Static Mode

This measurement mode is used for vertical alignment. Measurement requires 3 or more of the 8 available measurement positions.

Pass mode

Patented measurement mode for uncoupled and/or non-rotatable shafts.

Specifications:
Computer Intel XScale Processor, 64 MB RAM, 64 MB Internal Flash, 64 MB Compact Flash Memory, power saving management
Display Transflective (sunlight-readable) backlit color graphic display (1/2 VGA, 480 x 320 pixel, 118 mm x 80 mm), contrast and illumination (0 … 70 cd/m squared) adjustable
Power Supply Li-Ion rechargeable battery (7.2 V/6,0 Ah),
Operating time: Approximately 25 hours
Disposable batteries: (6 x 1,5 V [IEC LR14]),
Operating time: Approximately 12 hours
Mains power: (110 V/220 V AC)
Interfaces USB Host/Slave (for printer, keyboard or PC communication),
I-Data-socket (for receiver), RS232 (Serial for receiver),
Bluetooth communication
Laser GaAIAs semiconductor laser, Beam divergence < 0.3 mrad, Beam power < 1 mW, Laser safety class 2 (FDA 21CFR 1000 und 1040),
Power supply 9V block battery (IEC 6LR61, alkali or lithium)
Receiver 5-axis receiver: 2 planes (4 displacement axes), 1 inclination 360 degrees,
protection from ambient light, unlimited dynamically extendible measurement area, resolution 1 um (0.04 mil) and angular 10 urad,
error < 2%, error rotation angle < 2 degrees, measurement range approx 20 Hz
Environmental protection Computer: IP 65
Laser: IP 67
Receiver: IP 67
Temperature range (storage) Computer: -20 to 60 C
Laser: -20 to 60 C
Receiver: -20 to 80 C
Temperature range (operation) Computer: 0 to 45 C
Laser: 0 to 60 C
Receiver: 0 to 60 C
Dimensions Computer: 243 x 172 x 61 mm
Laser: 105 x 67 x 47 mm
Receiver: 105 x 67 x 47 mm
Weight Computer: 1 kg (without battery)
Laser: 165 g
Receiver: 190 g
Maximum measurement distance Laser: 10 m
CE conformity EN 61326 (general), EN 55022 (emission), EN 61000-4-2, -3, -4, -5, -6, -11 (interference)
Included:

Pruftechnik Rotalign Ultra Laser Shaft Alignment System w/ (BC# 40968)
Licensed Applications:
Program Manager V1.84
Shaft Alignment V1.26
Rotalign Laser
Rotalign Receiver
Rotalign Ultra USB Cable
Rotalign Ultra USB / Peripheral Cable
Tape Measure
(2) Brackets w/ Chains
(3) Chains
(20) Support Posts w/ Case
AC Adapter/Charger
Hard Carrying Case