Previous product
Easy-Laser XT440 - Shaft alignment Original price was: $7800.Current price is: $3900.
Next product
Pruftechnik Rotalign Touch Laser Shaft Alignment System Original price was: $18300.Current price is: $9150.

Easy-Laser XT550 – Ex/ATEX Shaft alignment

Original price was: $20300.Current price is: $10150.

Features

Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.
Laser angle adjustment
Charger connector
Locking knob
Slidable target/dust cover
OLED display: battery status/unit angle
Extendable stainless steel rods
Chain tightening knob
PSD aperture
Laser aperture

Category: Tag:
Compare
Description

Easy-Laser XT550 – Ex/ATEX Shaft alignment

The Ex-approved XT550 system is developed for hazardous areas and is easily operated through the XT Alignment app. This is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery, checking soft foot, checking bearing play, and checking base twist while automatically documenting the results and optionally attaching digital photos.

Easy-Laser XT550 – Ex/ATEX Shaft alignment

The Ex-approved XT550 system is developed for hazardous areas and is easily operated through our XT Alignment app. It is an advanced measurement system for alignment of horizontal and vertical/flange mounted rotating machinery.​ With XT550 you can carry out the following:

Align the machine
Check base twist
Check bearing play
Check soft foot
Document and share the results

The XT550 alignment system has all the features of the XT660 with one major difference – it’s intrinsically safe and can be used in potentially hazardous areas.

The system comes with Easy-Laser’s dot laser technology, allowing you to measure large machinery and long spans. The measuring units are approved in accordance with the latest ATEX directive*, and are rated both IP66 and IP67 water and dust proof.
Choose your own display unit

Easy-Laser XT550 – Ex/ATEX Shaft alignment

System XT550 comes in two configurations; with or without the ATEX approved ecom Tab-Ex® display unit. The XT Alignment app runs on most iOS and Android units, as well as our own display unit XT11. However, those are not allowed in potentially explosive areas, but makes for a perfect complement for use in other places.

Measurement programs

Horizontal machines

The user interface is intuitive and guide you through the measurement process. It is animated and zooms into the most important things for each step. You can save the measurements of a machine for As found and As left in the same file.

Vertical/flange mounted machines

For measurement and alignment of vertically and flange mounted machines.

Easy-Laser XT machine train

Machine train

Build your own machine train with theoretically as many machines as you like. You can pick the reference machine manually, or let the program choose one that will minimize the need for adjustments.

Alignment program for cardan/offset mounted machines

Cardan/offset mounted machines*

For alignment of cardan/offset mounted machinery. (Requires additional Cardan bracket kit.)

Soft foot check

Alignment work begins with a soft foot check. The soft foot check ensures that the machine is resting evenly on all its feet by indicating which foot/feet should be adjusted. This is an important part of securing a reliable alignment. After the soft foot check is complete, you can go directly to the alignment program with all of the machine’s distance values saved.

Twist measurement

Program to measure flatness/twist of, for example, machine foundation, machine tables, etc.

Values – digital dial indicators

The Values program has a clear digital representation of the laser target, and a list view for recorded value.

Measurement methods

9-12-3

Measurement points are recorded at fixed points 9, 12 and 3 o’clock. This is the classic three-point method which can be used in most cases.

EasyTurn™ function

The EasyTurn™ function allows you to begin the measurement process from anywhere on the turn. You can turn the shaft to any three positions with as little as 20° between each position to register the measurement values. Voila! Measurement is complete!

Multi point

Multi point is basically the same as EasyTurn™, but instead you can record multiple points on the sector rotated. This will provide an optimized calculation basis. Perfect for e.g. turbine and sliding bearing applications.

Continuous sweep

Automatic recording of measurement values during continuous sweeping of the shaft. Hundreds of points are registered. You can start anywhere on the turn. Quality check of measurement is provided.

Uncloupled sweep

Rotate one shaft/unit at a time to pass with the beam over the other (stationary). Repeat alternately until enough measurement points are recorded. You can start and stop anywhere on the turn.

Smart functions
Measurement value filter
Result table
Multiple sets of feet
Thermal growth compensation
Tolerance check
Wide live adjustment
Adjustment guide
Select machine image
Mirror machine image
Read QR and bar codes
Templates
Locked feet
Select coupling type
Continue session
Sign reports electronically
Built-in manual
Multiple languages
AV connector
Documentation
Save to USB memory
Save to built-in memory
Make a printout
Add pictures
Versatile reports
Share your reports

Display unit ecom Tab-Ex®

Based on Samsung GALAXY Tab Active, ecom´s hazardous area tablet is certified for use in Zone 1/ 21 & DIV 1 hazardous areas.
Features

Glove-enabled touch-screen
Large 8″ display
ATEX approved

Rubber coated housing
Large and clear 8” TFT display, glove-enabled

Measuring units XT50-M / XT50-S

The XT50 measuring units are ATEX approved for use potentially explosive environments. The units utilize dot-type laser and 1-axis square PSD surfaces. A state-of-the-art OLED display shows the angle of the unit, making it easier to position it on the shaft. IP66 and 67, dust- water- and shockproof. Heavy-duty battery for very long operating times. Built-in wireless technology.

Features

Built-in wireless technology. Integrated rechargeable battery.
TruePSD technology with unlimited resolution for greatest accuracy.
Dual laser beams and PSDs.
Sturdy aluminium body. IP66/67 design.
ATEX approved.
OLED display shows the angle of the unit.
Slideable target.
20 hours operating time.
Laser angle adjustment
Charger connector
Locking knob
Slidable target/dust cover
OLED display: battery status/unit angle
Extendable stainless steel rods
Chain tightening knob
PSD aperture
Laser aperture

A complete system contains

1 Measuring unit XT50-M
1 Measuring unit XT50-S
2 Shaft brackets with chains and rods
4 Rods 60 mm [2.36″]
2 Rods 120 mm [4.72″]
2 Extension chains 900 mm [35.4″]
1 Measuring tape 3 m [9.8′]
1 Rod tool

1 Charger (100–240 V AC)
1 DC split cable for charging
1 Quick reference manual
1 Cleaning cloth for optics
1 USB memory with manuals
1 Carrying case Ex/ATEX

Optional

1 Display unit ecom Tab-Ex

Display Unit

Name
ecom Tab-Ex®
Type of display/size
TFT 8″ colour screen
Operating temperature
-20–50 °C
Communication
Bluetooth® LE4.0 Wireless technology, WiFi
Camera
8 Mp with flash (rear), 5 Mp (front)
Dimensions
WxHxD: 162x256x33 mm [6.4×10.1×1.3″]
Weight (without batteries)
1250 g [2.75 lbs]
Operating time
Up to 11 h continuously
Operating system
Android™ Oreo 8.1 or 9
Ex certified
II 2G Ex db ia op is IIC T5 Gb,
II 2D Ex tb ia op is IIIC T100°C Db,
-20°C ≤ Ta ≤ +50°C
Ex certificate number
Sira 19 ATEX 1017X, IECEx SIR 19.0012X

Measuring Units

Name
XT50-M / XT50-S
Communication
BT wireless technology
Type of detector
1 axis TruePSD 20×20 mm [0.79×0.79″]
Resolution
0.001 mm [0.05 mils]
Measurement accuracy
±1µm ±1%
Measurement range
Up to 20 m [66 feet]
Type of laser
Diode laser
Laser wavelength
630-680 nm
Laser class
Safety class 2
Laser output
<1 mW
Electronic inclinometer
0.1° resolution
Environmental protection
IP class 66 and 67
Operating temperature
-10–50 °C
Storage temperature
-20–50 °C
Relative humidity
10–95%
Housing material
Anodized aluminium + PC/ABS + TPE
Dimensions
WxHxD: 76×76.5×50.9 mm [3.0×3.0x2.0″]
Weight
316 g [11.1 oz]
OLED display
128×64 pixels
Operating time
Up to 20 h continuously
Ex certified
II 2 G Ex ib op is IIC T4 Gb, -10°C ≤ Ta ≤ +50°C
Ex certificate number
Presafe 17 ATEX 10552X, IECEx PRE 17.0049X

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Easy-Laser XT550 – Ex/ATEX Shaft alignment”

Your email address will not be published. Required fields are marked *

Shipping Info

Estimated shipping times throughout North America:

Shipping Type: Standard Ground
Cost: Free
Estimated Delivery Time: Product will delivery in 4-6 business hours

Non sive caeli fulminibus dixere formaeque radiis cognati. Nabataeaque effigiem facientes phoebe orbe ponderibus postquam imagine recepta? Capacius sive sidera pluviaque effervescere terrarum. Fossae quem convexi inclusum nova tepescunt metusque illic sidera. Mare recessit hunc quin? Emicuit naturae campoque scythiam dedit habentem levius!

Pondere aequalis erat: regio caesa otia videre principio. Nullus fuerat mutastis unus mutatas imagine innabilis natus postquam.