GE DMS Go+ A-Scan Basic Ultrasonic

The Krautkrämer DMS Go+ is suitable for thickness measurement in a wide variety of applications throughout the industrial and process spectrum. It is especially applicable for corrosion measurement and monitoring, even on coated components and structures and at high temperatures.

Typical applications include:

Oil & Gas

• Inspection and monitoring of corrosion in tubes, vessels, and tanks
• Measurement of remaining wall thickness through paint coatings

Power Generation

• Inspection of complex geometry tubes
• Monitoring of boiler efficiency by measuring oxide scale in boiler tubes with special probe OSS-10

Aerospace

• Maintenance checks

Metals Industry

• Thickness measurement of austenitic materials

Optional applications software such as TopCOAT technology, also allows measurement of coating thickness as well as metal thickness, while Auto-V measurement enables thickness to be measured on components with unknown sound velocities, without the need for a calibration block.

• Display 5 inch – 800 × 480 pixels, 108 × 65 mm (W x H), > 200 cd/m2
• Size (W x H x D)  – 175 × 111 × 50 mm (W × H × D)
• Weight – 850 g with battery
• Protection class – IP 67
• Operating temperature – 0 – 55 °C
• Battery – Li-Ion, rechargeable, > 8 hours operation time
• Power adapter / charger – 100 – 240 V AC, 50/60 Hz
• Probe connector – Dual Lemo-00 (T/R)
• PC interface – Micro USB
• Memory card – SD-Card 16 GB max
• Datarecorder – 100.000 readings per file. Multiple files can be stored on SD card 8 file formats, Attachment of A-Scan, B-Scan and micro grid
• Pulser – 120 – 250 V, Spike wave, Automatically matched to probe
• Pulse Repetition Frequency – 4, 8 or 16 Hz selectable
• Receiver – 110 dB dynamic, automatic gain control, Manual –high, -low, -auto
• Measurement range – 0,4 – 14.000 m/s (0.01 – 551 “)
• Units – mm, inch, μs
• Digital Display resolution – 0,01 mm or 0,1 mm (0.001” or 0.01”) selectable
• Measurement techniques – Zero crossing, IP to 1st echo, multi echo, TopCoat, Auto-V
• Calibration – One-point, Two-point, Auto or Manual On-block and Off-block Zero, Automatic V-Path correction
• Display mode – Thickness and A-Scan, Temperature corrected thickness, B-Scan, Min/Max capture, Differential
• Compliance – EN 61010,EN 61326-1, EN 12668, ASTM E 1324, E317, ANSI/NCSL Z 540-1-1994, MIL-STD 45662A, MIL-STD 2154, EN 15317